Reactive sulphide(s)
Reactive sulphides can influence processing performance and environmental considerations. We discuss their identification and characteristics using a range of analytical techniques.
Mineralogy Solutions Pty Ltd
9/11/20253 min read


This article focuses primarily on pyrrhotite, which is often described as ‘reactive sulphide’ due to its tendency to quickly oxidise in the presence of moisture. This leads to passivation on the surface, which impacts flotation, but can also result in self-heating and even self-ignition if it is not properly mamanged, especially if stockpiled as part of a moist sulphide concentrate at elevated temperature. It can play a significant role in the overall behaviour of sulphide ores, especially Ni-sulphide ores, and it can have an impact from blasting through flotation to concentrate storage and AMD potential of tailings.
While the main focus is on pyrrhotite, marcasite will be mentioned, too. There was a particular case we were investigating, where it was responsible for the self-ignition of a concentrate stockpile.
Pyrrhotite is a term used for an Fe-deficient iron sulphide mineral group with the generalised formula Fe1-xS, where ‘x’ is deemed to be in the range of 0 ≤ x ≤ 0.125. The stoichiometric end-member with x = 0 is called troilite.
The minerals in the group can be divided into magnetic and non-magnetic pyrrhotites based on the Fe:S ratio, with members with a lower Fe:S ratio being magnetic (~Fe7S8, often called ‘4C’, referring to the crystallographic multiple of the C-axis of the NiAs structure that is used as a reference) and members with higher Fe:S ratios being non-magnetic. These have a few structurally more ordered members with compositions approaching Fe9S10 (5C), Fe10S11 (11C) and Fe11S12 (6C), but also covering the ranges in between.
Magnetic pyrrhotite is generally seen as the problematic one, and numerous studies show that it indeed oxidises more quickly than the non-magnetic varieties. This in turn can affect processing options and recoveries, particularly in the case of Ni-sulphide ores, where it generally carries some of the Ni, and is also often intimately intergrown with pentlandite and other sulphide minerals. It is also present in Cu and PGE ores hosted in similar settings.
The number of research studies available in the literature are a clear testament to the importance of pyrrhotite in the extraction and recovery of Ni, cu and PGEs, as well as in the assessment of the potential for AMD.
But how to determine if the pyrrhotites are a (potential) problem?
There are a number of techniques available to assess if pyrrhotites are present in your ore, and the types of pyrrhotites present. Yes, we need to talk in the plural, because there is generally more than one type present, and the mixtures of magnetic and non-magnetic pyrrhotites will also have variable Fe:S ratios.
Often the client only needs to know that pyrrhotite is present, and what type (magnetic or non-magnetic, or both), so that appropriate steps can be taken. They approach a mineralogy laboratory because they want a positive identification due to indications or a strong suspicion that pyrrhotite is present. However, the first step is still the confirmation that it is indeed pyrrhotite that is present, and if so, which polytypes.
To do this, the main techniques would be XRD and optical microscopy, as SEM based techniques cannot successfully differentiate the very similar Fe:S ratios. XRD can help with both questions (presence and polytype) at the same time, as long as the concentration of the individual phases is high enough, because the most common magnetic and non-magnetic varieties have different structures, and therefore different XRD patterns.
Optical microscopy can also provide textural information about the association of the phases, but it will require fairly large particles and some additional treatment.
XRD can also help in telling the client what else might be the culprit. This is where the story of the client with marcasite comes in. We were asked to identify and quantify the polytype or polytypes of pyrrhotite in Cu concentrate samples. The mine was located in a tropical environment with high temperatures, and the client had previously suffered a fire in their Cu concentrate stockpile. They had resorted to using lime and calcite to capture the sulphuric acid produced during the oxidation of what they believed to be pyrrhotite. However, once we analysed the samples we identified marcasite, which is also highly reactive, and made sense in the skarn type deposit the client was mining. Marcasite is the other polymorph of FeS2, and it oxidises readily, like pyrrhotite, in a moist environment.
Do you have an issue with reactive sulphides? Come and talk to us.
Independent. Experienced. Solutions focused.


