XRD

An overview of XRD analysis, data interpretation and its applications in mineral characterisation and process mineralogy.

Mineralogy Solutions Pty Ltd

12/9/20253 min read

The good the bad and the ugly

The when, why, and when not.

Powder X-ray diffraction, now often abbreviated to XRD (X-ray diffraction, even though XRD encompasses much more) is a very powerful tool, especially when dealing with crystalline materials. In the context of this post, I will use ‘XRD’ to mean ‘powder-XRD’, and ‘phase’ and ‘phases’ wll include ‘mineral’ and ‘minerals’. The reason why XRD works so well, is that every crystalline phase has a unique ‘fingerprint’ that allows for the identification and, to some degree, quantification of the phase in question, either by itself or in a mixture.

What do we mean by ‘crystalline phase’? Simply speaking, a phase is crystalline when it contains an ordered arrangement of generally small building blocks made up of atoms (a ‘unit cell’) that, when repeated in 3 dimensions, fills space without gaps. Generally, the unit cell chosen is the smallest such building block that can fill the space when repeated in all directions. The measure of crystallinity is linked to the number of these unit cells that are orderly packed without breaking the arrangement, and the density of defects. The greater the long-range order, the better crystalline the phase is. Conversely, there is a lower limit, below which the phase is deemed amorphous.

There are some minerals that are generally more crystalline than others, and there are some mineral assemblages that are generally more crystalline overall.

But when to use XRD, and why, and when and why not?

Let’s start with the limitations.

XRD is generally not a good technique for the identification and quantification of trace phases. But in this context, the meaning of ‘trace phases’ is not a fixed term. We have successfully identified amphibole in talc at a concentration of 0.1 % and quartz in carbonate at an even lower level, but 3 % graphite might be missed, if it is not well crystalline, and for example a lot of quartz and mica are present.

XRD will not provide any information on macroscopic parameters like particle and grain sizes, associations, etc., but it can be used to determine the size of the ordered domains, and if a phase is indeed crystalline. XRD is an excellent tool to obtain data on the modal composition of a sample. It analyses a significant volume of the sample, and the fact that it is non-destructive also means that the same sample can be used in further analyses. If one needs to know which crystalline phases are present, and how much of each, XRD is a good choice. It is also very good at differentiating polymorphs and polytypes – phases of identical composition, but different structure. We have used it to determine that an antibiotic was the correct polymorph. XRD works best when all the phases of interest are well crystalline (the good) and show little variation in composition or substitution. In that case the pattern will show sharp, well-defined peaks, making the identification and quantification of the phases present possible.

Crystalline phases with variable compositions and substitutions can make it look like the phase or phases in question are less crystalline. Phases that have natural disorder, like chrysotile or weathering products like goethite, or partially crystallise and compositionally variable minerals can make identification and quantification more difficult (the bad). These samples can also contain some poorly crystalline and even amorphous material, where the order is no longer long-range, but short range, leading to some broadening of the peaks. These circumstances increase the level of uncertainty in the identification and quantification, and the lower limit of detection for these phases increases. These samples are more appropriate for a qualitative XRD analysis, where phases are identified and quantified, but reported in broad quantity ranges.

Samples that are largely amorphous (the ugly) are not good candidates for XRD analysis, and should only be used for phase identification, if there are defined peaks. ‘Amorphous’ in this context means that there is little to no coherent scattering. The patterns might still show peaks; however, these are now representative of short-range order (limited degrees of freedom) of mainly molecular groups. A good example is glass, which still has SiO4 tetrahedra connected via the oxygen atoms that have some degree of freedom in the arrangement (rotation, tilt).

In summary, it is good to have some idea about a sample before selecting XRD as an analytical tool, and a clear understanding of the information that is needed. This is where we Mineralogy Solutions Pty Ltd can help. Feel free to reach out to discuss your project with us.

Independent. Experienced. Solutions focused.

© 2026 Mineralogy Solutions Pty Ltd. All rights reserved.