XRD Analysis: Semi-Quantitative vs Fully Quantitative - Why Amorphous Content Matters?

Understanding amorphous content is critical for accurate phase quantification and meaningful mineralogical interpretation in some projects.

Mineralogy Solutions Pty Ltd

12/2/20252 min read

XRD is one of the most powerful tools in mineralogy, but choosing between semi-quantitative and fully quantitative analysis can make a huge difference in data quality. One key factor that often gets overlooked is the amount of amorphous (non-crystalline) material in the sample.

When amorphous content is high, semi-quantitative methods can easily mislead you.


🟦 Semi-Quantitative XRD (SQXRD)

A fast, practical way to estimate mineral proportions based on relative peak intensities.

βœ”οΈ Strengths:
β€’ Quick results
β€’ Cost-effective
β€’ Excellent for crystalline samples

⚠️ Limitations:
β€’ Cannot measure amorphous content
β€’ Inflates crystalline phases to compensate
β€’ Accuracy drops for weathered, altered, glassy, or clay-rich samples

If your material is mostly crystalline, semi-quantitative XRD is usually more than enough.


🟩 Fully Quantitative XRD (FQXRD)

A more comprehensive workflow that provides true mineral abundances, including amorphous content.

How it works:
β€’ Uses an internal standard (commonly corundum or ZnO)
β€’ Compares expected vs measured intensity of the standard
β€’ Corrects mineral abundances accordingly
β€’ Often requires multiple XRD scans and extra processing time

This approach ensures that all crystalline phases + amorphous material are accounted for correctly.


🟧 Example: Why This Matters

Imagine a sample with 50% amorphous material (e.g., volcanic glass, amorphous silica, fine clays, weathered matrices).

Semi-Quantitative XRD result:

Quartz β€” 40%

Feldspar β€” 25%

Illite β€” 20%

Chlorite β€” 15%

➑️ Total = 100% (but missing the 50% amorphous)
➑️ Crystalline minerals appear twice as abundant as they really are.


Fully Quantitative XRD result (with 20% corundum added):

Quartz β€” 20%

Feldspar β€” 12%

Illite β€” 10%

Chlorite β€” 8%

Amorphous β€” 50%

➑️ Total = 100% (accurate, balanced)


🎯 When to Choose Each Method

Semi-Quantitative XRD is ideal when:

β€’ Samples are well-crystalline
β€’ The focus is on mineral trends, not exact numbers
β€’ Amorphous content is low or not critical to interpretation

Fully Quantitative XRD is recommended when:

β€’ Samples contain high amorphous material
β€’ Weathered, clay-rich, hydrothermally altered, or glassy samples
β€’ You need reliable, defensible mineral percentages
β€’ You want the amorphous content reported accurately


✨ Final Thoughts

There is no β€œone size fits all” approach in XRD.
If your sample is highly crystalline, semi-quantitative analysis is often sufficient. Otherwise, fully quantitative may give you a more accurate result.

Better characterisation = better decisions.
If you’d like to discuss how to choose the right XRD workflow for your material, feel free to reach out to us at
Mineralogy Solutions Pty Ltd. Happy to help! πŸ€πŸ”


#XRD #Mineralogy #Geology #MaterialsCharacterisation #Mining #Geometallurgy #ProcessMineralogy #ExplorationGeology #AnalyticalTechniques #MineralsProcessing #Geoscience

Independent. Experienced. Solutions focused.

Β© 2026 Mineralogy Solutions Pty Ltd. All rights reserved.