XRD - The importance of the sample and its preparation

The same sample can tell different stories depending on how it is prepared for analysis. In this post, we explore how sample preparation affects XRD results and what to consider for reliable mineral identification and quantification.

Mineralogy Solutions Pty Ltd

7/26/20252 min read

Changes in the XRD pattern with grinding time
Changes in the XRD pattern with grinding time

This, the second post about XRD, will be focusing on the importance of sample related factors that influence the quality of the data. Please note that we use ‘sample’ in the broader context, meaning the overall sample and also the analysis volume (specimen being analysed).

We will be focusing on sample related factors and sample preparation in the context of XRD, and the, sometimes conflicting, requirements for good quality data.

We will not delve into the dynamic theory of diffraction here, but it is important to understand that XRD analysis is essentially looking at the interaction of X-rays with the 3-dimensional electron density function of the material being analysed. This means that the XRD pattern is influenced by the elements present, their short-range arrangement as it refers to the electron distribution (e.g. SiO4 tetrahedra, CO3 planar groups, etc.) their organisation into a 3-dimensionally repeating building block (the unit cell) and framework (crystallite and crystal).

It is also influenced by the distribution and periodicity of features that break the symmetry (in essence the density and randomness of ‘defects’) and the thermal motion. On a more macroscopic scale, it is influenced by the particle size, and the randomness of the orientation of the particles. Sample preparation also includes the actual packing and preparation of the sample for analysis, and this, too influences the outcome.

So, what are the factors impacting the XRD results that are directly related to the sample?

Ideally, we would like every XRD sample to be made up of small, randomly oriented and defect-free particles – but that is not realistic.

Let’s look at them in a bit more detail.

1) Particle size. The smaller we grind the particles the more defects will be introduced and the more damage is caused. Even in an ideal situation, every particle produced by crushing/grinding/pulverising has a layer of amorphous material ‘coating’ the particles. This can be quite substantial, but even if we assume a mere 100 nm for the amorphous layer, the volume represented by this amorphous layer increases from ~0.8 % at 38 µm sized particles to about 9.7 % at 3 µm particle size. Not to mention that different phases have different grindability, and will therefore have different amounts of ‘amorphisation’. And indication of this is shown in the image in the header, which represents the same pre-pulverised (P80 75 µm) sample after being pulverised for an additional 1 (black), 2 (red) and 3 (cyan) minutes in a ring mill.

2) Random orientation. Some minerals have preferred cleavage, some are platy, etc. It is generally easier to achieve a more random orientation, if the particles are smaller. However, the amorphisation and the non-random particle size reduction occurring due to the preferred cleavage and grindability can counteract this. In that case, preferred orientation persists until the particles are extremely fine. Just think about blue (fibrous variety of riebeckite, aka crocidolite) and white (chrysotile) asbestos, or the ultrathin sheets of talc.

3) Crystal-defect free. Crystal defects include all point, linear and planar defects. Perfect larger crystals are not found in nature, and the defect density is usually quite high. Even in high purity synthetic materials like Si, where the number of defects can be as low as 1015 defects per cm-3, equivalent to 20 ppb. What we do to the sample impacts the defect density, too, and the milling of the sample does introduce more defects. Crystallinity is directly related, as it represents the size of a defect-free domain. If that becomes too small, the phase becomes amorphous.

There are ways to address the conflicting requirements, and we at Mineralogy Solutions Pty Ltd can help you decide how to best prepare and analyse your samples.

Independent. Experienced. Solutions focused.

© 2026 Mineralogy Solutions Pty Ltd. All rights reserved.